Double Strong Vibration Red Vibrator for Woman

Instructions
Product Specification
Size:Length:9.4in(23.9cm)
Diameter:1.5in(3.8cm)
N.T:200g G.w:360g
Color:Pink
Pacakage size:10.63*3.54*2.32in(27*9*5.9cm)
Material:Silicone
Surface:Matte luster
Storage Temperature:0°Cï½?0°C
Room Temperature:Maximum temperature 40°C
Charging Voltage:5V
Charging Current:220mA
Charging Time:2.5h
Recharging Cycle:500 times
Working Voltage:3.8V
Working Current:250mA average
Working Time:About 2h
Standby Time:30 days
Charging:Magnetic wireless charging

Attention:
The vibration should seperate to charge, please see the last picture.

Operation Methods
In power off state,press the button“â€?to turn on it.When the indicating light is always on,please press the buttonâ??â??to choose the vibration modes.
In power on state,press the button“â€?to turn off.The light goes out.The vibrator stops.
In power on state,press the button“â€?the product will vibrate at the arrowhead. Press it in sequence to complete the cyclic switching between different vibration modes.
In power on state,press the button“â€?the product will vibrate at the arrowhead. Press it in sequence to complete the cyclic switching between different vibration modes.

APP Download and Usage
Please use mobile phone to scan the two-dimensional code on the package or on the instructions.Then download and install the APP according to the prompts.
In power off state,press the button“”to turn on it.The indicating lights is on.Please open the APP and click the icon “Bluetooth” in the main interface.Please choose”VX002 xxxx” to connect the mobile phone and product.The phone will indicate that the Bluetooth is connected successfully.At the meanwhile,the indicting lights of product twinkles.
To choose the work direction from the sketch map of product and to know which part is vibrating through animation.Click the button of each modes to switch the vibration modes.

Custom Mode
Click the “Custom” icon to enter the page of custom mode.Rolling the circular icon to adjust the vibration intensity and clicking save button.This intensity value will be shown below the interface.It could be saved 8 at most.
Long press the button of intensity value,there will be a delete icon.Click this icon to delete the vibration intensity.
After choosing the work direction through animation,please click the intensity values you save to make the product work.Click the button again,the product stops vibration.

About “Mine”
Click “Mine” icon to enter the information page,you can see the software version number of mobile phone.
Click “My vibrator” and click “Disconnection” icon to disconnect Bluetooth connection between the phone and the product.
Click “About Youou” to learn about related information about “Youou”.
Click “Set Language” to set relevant language.

Cleaning
Please use hot water and antibacterial soap to clean the product.Please make sure that the water doesn’t contact the electronic components such as batteries,motors,PCB and etc..Don’t use detergents containing alcohol,petrol,or acetone.Also,please don’t use the silicone-based lubricants.Cleaning time should be as short as possible because this product could not be soaked too long.

Storage
Please don’t save it in a prolonged sunny position.Please avoid high temperature and lower temperature.
This product should be saved in a dust-free environment and could not put into the fire.

Recycling
This product should be disposed according to special regulations of European Union or the country it stays.

Note

In power on state,the indicator will flash at a 3-second interval if the battery power is less than 15%.
1 year warranty,but the damage caused by human or external forces is not covered by the warranty.